Kitchen Faucets Manufacturers - Working Characteristics Of Faucet






The faucet is a popular name for the water valve. It is used to control the size of the water flow switch and has the effect of saving water. The faucet has a fast replacement speed, from the old cast iron process to the electroplated knob type, and has developed into a stainless steel single temperature single control faucet, a stainless steel double temperature double control faucet, and a kitchen semi-automatic faucet. Nowadays, more and more consumers are buying faucets, which will be considered in terms of materials, functions and shapes.



Before the appearance of the faucet, the water supply spring wall was inlaid with a beast-like shape, usually made of stone. A few "water nozzles" made of metal, the water flowing out from there was always a long flowing water without any control. In order to avoid wasting water and solving the shortage of water resources, people have developed faucets.



Production process of faucet: copper ingot→dissolution→casting (low-grade casting with sand casting, gravity casting with high-quality faucet)→cleaning after casting→casting inspection→machining→tolerance inspection→testing leak→grinding→surface inspection→electroplating → Electroplating inspection → assembly → test water leak test → finished product inspection → packaging → factory. Casting: low-grade casting with sand casting, high-quality faucet with gravity casting, the new technology is die-casting, and the primary pressure-molding process is similar to the zinc alloy die-casting process. Quality control: The quality of the production process before the finished product is controlled by quality control. The finished product to the packaging is sampled by the quality assurance part, mainly to check the packaging and placement of the product.



The electric faucet is also called a hot faucet or a quick faucet, including a faucet body and a water flow control switch. The faucet body is provided with a heating chamber and an electric control chamber, which are separated by a sealing plate, and a heating circuit is provided in the electric control cavity. There is a heating pipe inside, the heating pipe power is generally 2-3KW, the hot water can be heated in 3-5 seconds, and the heating pipe is connected to the heating circuit, characterized in that the heating pipe is an insulated heating pipe; the insulating heating pipe It is a hydroelectric isolation type insulated heating pipe; the faucet body is mostly high temperature resistant engineering plastic type, a few are all metal type; the electric control cavity is provided with an insulating water pressure switch. The heating circuit is provided with an electrical switch, which is connected with the end of the insulating water pressure switch, and is connected to the water and electricity. The temperature controller and the anti-drying device are arranged therein, and the leakage protection switch can also be provided.



kitchen faucets manufacturers recommend that you should pay attention to the diameter of the water outlet when purchasing a single-handle basin faucet. Most of the market is filled with hard pipe, so you should pay attention to the height of the water inlet, which is suitable for 35 working points from the basin. When installing, the special angle valve should be selected, and the angle valve should be fixed with the hot and cold water pipes of the wall outlet. When you find a distance between the angle valve and the water pipe on the faucet, purchase a special extension tube to connect. Remember, don't use other water pipes to connect, because if the water pressure is too large, it will easily fall off and leak.


Ningbo AFA Kitchen and Bath Co ,Ltd . is a professional kitchen faucets manufacturers in China. Follow us to see more kitchen faucet product information and related technical information: https://www.afastainlesskb.com/

Linsheng : How To Use Portable Air Compressor

Portable air compressors have become an important thing in this era, including the use of simply inflating football and tires, inflating cylinders, and powering pneumatic tools such as wind guns, grinders, wrenches and paint sprayers.

It is very easy to operate these compressors, but in order to maintain their safety and durability, there are several steps that must be followed when using this equipment. With proper operation and maintenance, the machine will work more efficiently and have a longer life.


So what is the effective procedure for operating a portable air compressor? This system guide will teach you how to use this basic tool correctly for great results.


1. Set up the air compressor
The assembly process of an air compressor is usually different depending on the manufacturer/model. The machine's user manual usually contains instructions to guide you through the proper setup of the machine. This is the first and most important step to ensure that the correct connection does not cause any damage. One setup procedure that should be performed on all models is to connect the compressor hose to the regulator valve of the machine.

2. Check the oil and fuel level
Checking the oil level is a standard procedure whenever using this type of machine. Oil is a substance that lubricates and cools the engine, so running a low-oil air compressor can cause the engine to crash, which is difficult to repair and most warranties are not included. If the oil level is below the fill line, it must be topped up and if used for a long time, the oil must be replaced as described in the video below. You also need to check for oil leaks and close the responsible outlet to avoid confusion and reduce machine efficiency.

You must also check the amount of fuel to ensure that the machine can run for a long time. This prevents unnecessary interruptions between chores to replenish fuel.

The most common sources of power in air compressors include natural gas, diesel and electricity, with differences in efficiency, cost, eco-friendliness and ease of use.

3. Close all exhaust valves
To ensure that the air remains intact during compression, it is important to close all exhaust valves. This prevents air leakage to keep the pressure difference of the compressed air constant. Depending on the machine's user manual, you must ensure that the different valves are set correctly before proceeding to the next step.

4. Start the engine
Compressor If the portable air compressor is electrically powered, connect its cable to the nearest power outlet and turn it on. If it is not electric, make sure the fuel is sufficient and then turn it on again.

This will start the engine and its speed will gradually increase until it reaches its highest level. You should then allow the compressor to warm up for a few minutes before starting to compress the air entering its tank/cylinder until the maximum pressure is reached. You will then close the tank drain valve to prevent air from escaping and allow it to cool for a while before stopping the engine.

5. Use it on power tools
You can finally use it to drive your tools.

Portable compressors can be used to fill cylinders, provide clean air to divers, drive pneumatic HVAC units, power pneumatic tools such as jackhammers, and power industrial processes such as petroleum oxidation. Smaller portable air compressors can actually be used to power the car.

maintenance
Below is a list of some of the most important maintenance procedures you should perform when you want to use a portable air compressor.

Check for air and oil leaks and seal or repair.
Check the condition of the air filters and clean or replace them.
Replace whenever the oil gets old.
Keep engine oil and fuel levels at the desired level.
Verify the safe temperature of the air compressor operation to avoid overheating.
Inspect the body of the machine for dents or breakage and repair or replace parts.
These are just a few of the aspects that should be noted when owning or using an air compressor. For more maintenance procedures, you will need to check the user or maintenance manual for the device for instructions.


Each portable air compressor model has a different structural and functional design and each operation can be completely different.


Linsheng is a professional Air Compressor Manufacturers and Air Compressor Suppliers in China. We treat our customers with the most positive attitude. The answer is the most professional and reasonable offer. For new products, we will listen to our customers and provide useful advice to ensure we produce the best products. Https://www.linsheng.com

Assembly Komutları Ve Anlamları #Assembly Programlama Sanatı

Komutlar Ve Anlamları

Jmp : (Jump ) : Sıçra Demektir Dallan Yani
Inc : Bir Artır Manasına Geliyor.
Mov : (Move): Taşı Demektir.
Call : (Çağır): Yaptığın İşe Ara Ver Demektir.
Loop : Programı Belirlediğimiz Adrese Belirlediğimiz Sayıda Sıçratır
Ah : Rejisterinin Değerini 1 Yaparsan Klavyeden Bir Tuşa Basmanı İster,Tuşa Basınca Değeri AL Rejisterine Koyar.
Ip : (Insruction Pointer): Komut İşaretçisi
Ds:Dx :Mesajın Başlangıç Adresidir.
Db: (Defime Byte) Byte Tanımlama .Sabit Bilgileri Barındırır.Sonunda $ İşareti Olabilir.
Nop: No Operation : İşlem Yok Boş Komut
Cs : Program Kodunun Nerede Olduğunu Bildiren Bir Bildirgedir.
Mov ch , 4 = rakam adedi döndür.
Mov cl , 4 = sayıca 4 byte ayarla.
Rol bx, cl= bx’i 4 byte ayarla
Jnz döndür= gitmediyse döndürmeye devam et
İnt 20h= işletim sistemine geri dön.
Add= topla
Cmd(karşılaştır)
Jl: (Jump Less) = Ufaksa Sıçra
Jnz (Döndür) Jump Not(Zero (Sıfır) ..Sıfır Değilse Sıçra
Jz= (Jump Zero) Sıfırsa Sıçra
Sub (Subtract=Çıkart)
Jg= (Jump Greater) Büyükse Sıçra
Cbw=(Convert Byet To Word) Byte ı Kelimeye Çevir
Mul= (Multıply) Çarp Komutu
Xchg= (Exchange) Değiştir Komutu
Retn= (Return) Geri Dön Komutu
Jne= Aynı Değilse Devam Ettir.
Far= Uzun Demek
Lea= Efektif Adresi Yükle Demektir.
Je= (Jump Equal) Eşitse Sıçra
Ror= (Ratate Right) sağa çevir.bir rejistinin kollarını sağa çevir.
Push= (push=it, sakla demektir.
Pop= çek geri getir demektir.
Equ= (equivalent) eşit değer demektir.
Assumu= farzet demektir.
Rep= (repeat) tekrarla demektir.
Movsb = (move byte strıng) byte’den oluşan bilgi dizini taş.
Cld=( clear dırectıon flag forward ) istikamet bayrağını öne ayarla demektir.
Std= (set dırectıon flag) istikamet bayrağını arkaya ayarla demektir.
Cmpsb= (compare strıng byte) byte stringlerini karşılaştır.
Repe= (repne) repeate while equal= eşit olduğu müddetçe tekrarla.
Repz= (repnz) repeate whıle zero= zero flag kaldığı müddetçe tekrarla
Mov al, bl= BL’nin değerini AL’e koy.
And all= AL’nin 4 bitini sıfırla
Add al, 30h= AL’in değerinin ASCLL kodunu bul
cmp al 3ah = bu ASCLL kodu ‘g’ dan büyük değilse jl ekrana ardesi sıçra
add al, 07h = ascll koduna A’dan F’ye değer ver.
Mov dl, al= hazırlanan sembolü DL’e yükle
Mov ah 02h= ekrana gönder foksiyonu
Int 21h= DOS’tan yardım iste
Dec ch= tüm rakamlart ekrana gittimi